7 Channel 2.4 GHz Aircraft Computer Radio System
Section 3: System Menu Programming
37
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 2: Quick Start Guides
36
Model Type HELI Menu Programming
1. From the System Menu select MDL TYPE.
2. Press the jog dial once to enter the Model Type Selection
Menu and scroll to HELI.
3. Press the jog dial once to enter the HELI setup menu. to enter
the HELI setup menu.
4. In the HELI menu you will set the swash type. Scroll to highlight “SWASH” and press the jog dial to
activate the menu.
There are three types of Swash types to choose from:
90° 1 servo: The three swash servos are configured 90° apart, and each servo provides
independent control of collective, pitch, or roll.
120° 3 servos: The three swash servos are configured 120° apart, and all servos operate in unison
to control collective, pitch, and roll.
140° 3 servos: The three swash servos are configured 140° apart, and all servos operate in unison
to control collective, pitch, and roll.
Your helicopter’s manual will indicate the type of swashplate on your model.
5. Select the Swash type that your helicopter has and press the jog dial to confirm your selection.
6. Press the back button to return to the system menu.
Channel Selection Menu
The Channel menu allows you to choose the function (AILE, THRO, RUDD, etc.) and control input method
(joystick, switch, slider, etc) for each channel. This programming function permits a high level of creativity
in the way you can customize the Flash 7 to suit your personal flying style.
1. From the System Menu scroll to CHANNEL and press the jog
dial to enter the Channel selection menu.
2. To assign a channel to a specific function, scroll to highlight
the channel you want to assign and press the jog dial to enter
the menu.
3. Scroll to the channel function field (AILE, ELEV, etc.) and press
the jog dial to activate the selection menu.
4. Scroll through the choices to select the desired function of
that channel and press the jog dial to confirm your selection
5. To assign a channel to a specific transmitter control, scroll
to the input device field (J1, LS, etc.) and press the jog dial to
activate the selection menu.
6. Scroll through the choices to select the desired transmitter
control you want to use for that channel and press the jog dial
to confirm your selection.
7. Use the back button to exit the Channel Function/Control selection menu.
Default channel assignments are based on the Model Type, Wing, Tail and Swash type setups.
However you can assign any channel to any function or transmitter control.
Warning
Note
Tip
Tip
Tip
Caution
The Flash 7 has two Virtual Channels VC1 & VC2. The virtual channels can only be assigned to a
transmitter control and then mixed with another channel in the programmable mix function.
For more information on the use of virtual channels see the programmable mix functions in the
model programming sections beginning on page49.
Warning
Note
Tip
Tip
Tip
Caution
Содержание Flash7
Страница 1: ......