7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 2: Quick Start Guides
Section 2: Quick Start Guides
28
29
5. Select the first default model (NONAME-1) and press the jog
dial to bring up the model maintenance prompts. Select
“NEW” to create a new model.
6. When asked to create a new model select “Yes.” This will bring
up the Model Type screen.
Select HELI to advance to Swash Type. Scroll to Swash Type and
press the jog dial to activate the choices.
7. Scroll through the Swash Type entries until you see 120°
3-SERVO. Press the jog dial to confirm your entry.
8. Now press the back button once. You will be prompted to
choose the receiver type. Press the jog dial once to activate
the receiver selections and scroll to the receiver you have in
your aircraft. Press the jog dial once to confirm your receiver
selection.
9. Turn your transmitter off and then back on. When prompted to transmit this time select “Yes.” You
are now ready to fly a simple helicopter with basic settings. If a more complex setup is needed refer to
sections 4 and 5 for more detailed programming instructions.
Helicopter Quick Start Guide
We are programming a new model into the model memory slot number two, not the model
memory slot one. For the purpose of this exercise it will ensure a fresh model memory with no
existing programming.
Note
Tip
Tip
Tip
System Menu Programming
From the System Menu you can do the following:
MDL.SEL:
Model Select Menu.
SELECT:
Select an existing model.
NEW:
Create a new model.
COPY:
Copy one model’s data into a new model memory slot.
RESET:
Reset the model memory to the factory defaults.
DELETE:
Delete a model memory.
RENAME:
Rename the model to a name of your choice.
MDL TYPE:
Model Type Menu.
ACRO:
Provides programming for most powered fixed wing aircraft.
GLID:
Provides programming for Gliders both powered and unpowered.
HELI:
Provides Helicopter programming functions.
CHANNEL:
Model channel assignment Menu. Allows control of any channel to be assigned to a switch or
joystick axis.
TRIM STEP:
Trim step size adjustment menu (1-200). Default is 12.
TRAINER:
Trainer options menu.
SENSOR:
Telemetry sensor setup menu.
SPECTRA: Receiver set-up.
Range Check Mode:
Power down mode for performing preflight range check.
Binding:
Use to bind a new receiver to your Flash 7.
Scanning:
Scan the frequency table for the clearest channels.
MODE:
Stick mode change Mode 1-4.
MANAGEMENT:
System Management Menu.
BACKLIGHT:
Adjusts how long the backlight stays on.
CONTRAST:
Adjusts the screen contrast.
BATTERY:
Used to specify the battery type used in the transmitter: Alkaline, NiMh/NiCD, LiPo or
LiFe.
If you have not already programmed a model with the preceding quick start guide, we
encourage you to do so before tackling the System and Model programming sections of the manual.
Warning
Note
Tip
Tip
Tip
Caution
There are two primary menus in the Flash 7 programming structure. The System function Menu and
the Model function Menu. The first menu we will explore will be the System Menu. This menu has all
the common programming function that are available for ACRO, GLID and HELI models. There are also
numerous options for customizing the operating characteristics of the Flash 7 transmitter.
Содержание Flash7
Страница 1: ......