7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 2: Quick Start Guides
Section 2: Quick Start Guides
30
31
System Menu Programming
UI FEEDBACK:
Turns the user interface sound feedback on or off.
WARNING SETUP:
Controls the various transmitter warnings
RF CHECK:
Prompts if you are “Ready to Transmit”
HIGH THROTTLE:
Warns if the throttle is not in “idle” position
FLIGHT CONDITION:
Warns if a flight condition switch is on
INFO:
Displays transmitter information such as software version.
Working with the System Menu
1. Turn on the transmitter. When prompted with the “ready to
transmit?” message, highlight “NO” and press the jog dial.
2. To access the system menu simultaneously press the back
button and jog dial.
3. The resulting list displays all the features of the system menu
associated with the active model. Full explanations of their
function can be found in the following text.
Model Select Menu
The Model Select menu can be accessed two different ways. One method is to highlight the model name
in the main screen and press the jog dial button. The other method is to select “MDL. SEL” from the system
menu.
From the model select menu you can:
Create a new model
Select an existing model to use
Copy one model’s data into a fresh model memory slot
Reset the model memory to factory default settings
Delete a model
Rename a model
Model Select Menu cont.
1. Create a new model:
When you create a new model, you
are also prompted to do other setup items. To avoid repetitive
information it is recommended that you read the quick start
guides in order to understand what other steps are required
when creating a new model. The “New” option is only available
if the last model in the list is selected.
2. Select an existing model:
b. Highlight “SELECT” and press
the jog dial.
c. When asked if you would like to
change the model, highlight
“YES” and press the jog dial.
3. Copy one model’s data into another memory slot:
a. If you haven’t already done so, create a new model by following the ACRO or HELI Quick Start
instructions.
c. Scroll to “COPY” and press
the jog dial to activate the
destination menu.
d. Scroll to select the model
memory slot where you would
like to place the data. Press the
jog dial to confirm your selec
tion.
e. When prompted to confirm that you want to copy, select “YES”
and press the jog dial to confirm your selection.
b. In the model select menu,
highlight the model you wish
to copy and press the jog dial.
a. Use the jog dial to scroll
through the list of models.
When you have highlighted
the model you want to
work with, press the jog dial
to confirm your selection.
Содержание Flash7
Страница 1: ......