Hioki LR8512, Инструкция по эксплуатации

Страница: 82 / 185

76
Setting Measurement Conditions
CT9692-90 20 A, 200 A
CT9693-90 200 A, 2000 A
CT7631 10 A, 100 A
CT7636 20 A, 200 A
CT7642 200 A, 2000 A
CT7731 10 A, 100 A
CT7736 20 A, 200 A
CT7742 200 A, 2000 A
CT9667 500 A, 5000 A
CT7044 50 A, 500 A, 5000 A
CT7045 50 A, 500 A, 5000 A
CT7046 50 A, 500 A, 5000 A
4
Select the zero suppression setting.
Settings:
ON Suppresses the value to zero when the count is less than 10 in each range.
OFF
Displays the value even when the count is less than 10 (for zero
adjustment for DC measurement).
5
Select the recording mode.
Settings:
Instantaneous Records the instant value for each recording interval.
Average
Measures every 0.5 seconds and records the average value for each
recording interval. (When the recording interval is less than 1 second,
the instant value is recorded.)
Maximum*
Measures every 0.5 seconds and records the maximum value for each
recording interval. (When the recording interval is less than 1 second,
the instant value is recorded.)
* The Model LR8513 Wireless Clamp Logger firmware version 1.30 or later is required to
be installed to use the instrument with the recording mode setting set to Maximum.
6
Select the filter setting.
Settings:
OFF
Does not use the filter.
Current measurement including high-frequency components can be
performed.
ON
For 50 Hz/60 Hz current measurement, unnecessary high-frequency
components can be cut.
With the scaling function, the measured current value can be displayed in a power
value. (p. 81)
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com