Hioki LR8512 Скачать руководство пользователя страница 147

Страница: 147 / 185

141

Browsing/Analyzing Measurement Data

Double-click the Android terminal icon.

The list of media connected to the Android terminal is displayed.

Double-click

[Internal storage]

in the list of connected media.

Copy the output file onto the local drive on the Windows

PC.

Browse/analyze the file using the supplied Logger Utility.

When the file is output to an external medium (SD card, USB flash drive, etc.)

Remove the medium from the Android terminal and connect it to the

Windows

PC.

The icon for the connected medium is displayed under

[Computer]

on the

Windows

PC.

Copy the output file onto the local drive on the Windows

PC.

Browse/analyze the file using the supplied Logger Utility.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание LR8512


























































































































































































Результаты поиска

Содержание LR8512

Отзывы:

Hioki LR8512, Инструкция по эксплуатации, Страница: 147 / 185

Результаты поиска

Содержание LR8512

Отзывы: