Hioki LR8512 страница 11 Скачать руководство пользователя

Страница: 11 / 185

Safety Notes

Safety Notes

This instrument is designed to conform to IEC 61010 Safety Standards, and has been

thoroughly tested for safety prior to shipment. However, using the instrument in a way

not described in this manual may negate the provided safety features.

Before using the instrument, be certain to carefully read the following safety notes.

DANGER

Mishandling during use could result in injury or death, as well as damage

to the instrument. Be certain that you understand the instructions and

precautions in the manual before use.

WARNING

If you do not have knowledge or experience of electrical measurements,

use this instrument under supervision of experienced personnel.

Notation

In this manual, the risk seriousness and the hazard levels are classified as follows.

DANGER

Indicates an imminently hazardous situation that will result in death or

serious injury to the operator.

WARNING

Indicates a potentially hazardous situation that may result in death or

serious injury to the operator.

CAUTION

Indicates a potentially hazardous situation that may result in minor

or moderate injury to the operator or damage to the instrument or

malfunction.

IMPORTANT

Indicates information related to the operation of the instrument or

maintenance tasks with which the operators must be fully familiar.

Indicates a strong magnetic-field hazard.

The effects of the magnetic force can cause abnormal operation of

heart pacemakers and/or medical electronics.

Indicates prohibited actions.

Indicates an action that must be performed.

Additional information is presented below.

Windows

Windows XP, Windows Vista, Windows 7, Windows 8 and Windows

10 are referred to as ″Windows″, otherwise specified.

Dialog

Windows dialog boxes are referred to as dialogs.

[ ]

The names and keys on the screen including menus, commands,

dialogs, dialog button names, etc. are enclosed in brackets

[ ]

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание LR8512


























































































































































































Результаты поиска

Содержание LR8512

Отзывы:

Похожие инструкции для LR8512

Бренды по названию

Популярные бренды

Hioki LR8512, Инструкция по эксплуатации

Результаты поиска

Содержание LR8512

Отзывы:

Похожие инструкции для LR8512

Бренды по названию

Популярные бренды