37
_____________________________________________________________________________________________
5.4 Commands Specific to the 3532-50, 3522-50
_____________________________________________________________________________________________
:CABLe?
(3532-50 only)
Queries the cable length.
:COMParator
Enables and disables the comparator function.
:COMParator?
Queries the comparator function enablement.
Syntax
:CABLe?
Function
Returns the current cable length setting as NR1 numerical data.
0, 1
Example
Response
If headers are on
:CABLE 0
If headers are off
0
Error
If the response message is longer than 300 bytes, a query error is generated.
Syntax
:COMParator
<data>
<data>
ON/OFF (character data)
Function
Turns the comparator function on and off.
Example
Transmission
:COMParator ON
The comparator function is turned on.
Error
If <data> is other than character data described above, an execution error occurs.
Executing this command while the open or short circuit compensation is
performed generates an execution error.
Syntax
:COMParator?
Function
Returns the current enablement state of the comparator function as character data.
ON, OFF
Example
Response
If headers are on
:COMPARATOR ON
If headers are off
ON
Error
If the response message is longer than 300 bytes, a query error is generated.
