Hilti DST 10-CA Скачать руководство пользователя страница 7

Страница: 7 / 52

*2328079*

2328079

English

13 China RoHS (Restriction of Hazardous Substances) . . . . . . . . . . . . . . . . 45
14 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
15 Manufacturer’s warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Information about the documentation

1.1 About this documentation

• Read this documentation before initial operation or use. This is a prerequisite for safe,

trouble-free handling and use of the product.

• Observe the safety instructions and warnings in this documentation and on the

product.

• Always keep the operating instructions with the product and make sure that the

operating instructions are with the product when it is given to other persons.

1.2 Explanation of symbols used

1.2.1 Warnings

Warnings alert persons to hazards that occur when handling or using the product. The

following signal words are used:

DANGER

▶

Draws attention to imminent danger that will lead to serious personal injury or fatality.

WARNING

▶

Draws attention to a potential threat of danger that can lead to serious injury or fatality.

CAUTION

▶

Draws attention to a potentially dangerous situation that could lead to personal injury

or damage to the equipment or other property.

1.2.2 Symbols in the operating instructions

The following symbols are used in these operating instructions:

Comply with the operating instructions

Instructions for use and other useful information

Dealing with recyclable materials

Do not dispose of electric equipment and batteries as household waste

1.2.3 Symbols in illustrations

The following symbols are used in illustrations:

These numbers refer to the illustrations at the beginning of these operating

instructions.

Содержание DST 10-CA





















































Результаты поиска

Содержание DST 10-CA

Отзывы:

Бренды по названию

Популярные бренды

Hilti DST 10-CA, Руководство по эксплуатации

Результаты поиска

Содержание DST 10-CA

Отзывы:

Бренды по названию

Популярные бренды