Hilti DST 10-CA, Руководство по эксплуатации

Страница: 9 / 52

*2328079*
2328079 English 5
1.4 Stickers
Stickers on the product
On the transport trolley
Using the transport trolley
On the saw head
Maximum water pressure and action to be taken in the event of
risk of frost
On the saw head
The machine is equipped with the Cut Assist function.
1.5 Product information
Hilti products are designed for professional use and may be operated, serviced and
maintained only by trained, authorized personnel. This personnel must be specifically
informed about the possible hazards. The product and its ancillary equipment can present
hazards if used incorrectly by untrained personnel or if used not in accordance with the
intended use.
The type designation and serial number are printed on the rating plate.
▶
Write down the serial number in the table below. You will be required to state the
product details when contacting Hilti Service or your local Hilti organization to inquire
about the product.
Product information
Electric wall saw DST 10-CA
Generation 02
Serial no.
1.6 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here
complies with the applicable legislation and standards. A copy of the declaration of
conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering,
Germany
1.7 Radio Equipment Directive
This equipment complies with IEC 61000-3-12 provided that the short-circuit power S
sc
is greater than or equal to 5 MVA at the interface point between the user's supply and
the public system
It is the responsibility of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment is connected only
to a supply with a short-circuit power S
sc
greater than or equal to 5 MVA.