Hilti DST 10-CA, Руководство по эксплуатации

Страница: 45 / 52

*2328079*
2328079 English 41
▶
Use a medium-hard brush and water to clean the saw head, rails, blade guard system
and transport trolley.
▶
Keep the operating controls and safety instructions on the product clean at all times.
▶
Close the covers on all plugs and connectors.
▶
Keep the operating surfaces of all parts such as threads, connectors, gear teeth and
moving parts clean at all times.
▶
Clean the outer surfaces of the machine with a slightly damp cloth at regular intervals.
Do not use cleaning agents containing silicone as these may attack the plastic parts.
▶
Check the compatibility of concrete release agents and concrete stain removers
before using them. Products that are incompatible can attack seals and housing parts,
causing embrittlement.
▶
After cleaning and maintenance, make sure that all safety devices are refitted and
check that these safety / protective devices function correctly.
10.1 Adjusting the guide rollers
@
Clamping screw
;
Guide roller
=
Eccentric guide roller axle
1. Fasten the track to the wall and then mount the saw on it.
2. Slacken the clamping screw for the guide roller locking mechanism.
3. Adjust the eccentric shaft of the roller axle so that the guide roller is in contact with
the track.
4. Retighten the clamping screw.
▶
It must be possible to turn the guide roller by hand.
5. Adjust the second roller in the same way.
10.2 Inspection
▶
Have the machine checked by Hilti Service at intervals of 200 operating hours.
The remote control unit shows the number of operating hours remaining until the
next service is due.
▶
Check all visible parts and controls for signs of damage at regular intervals and make
sure that they all function correctly.