Hilti DST 10-CA, Руководство по эксплуатации

Страница: 34 / 52

30 English 2328079
*2328079*
▶
Check the O-ring on the inner flange for wear and damage.
▶
Before operating the saw, check the saw blade for damage (e.g. cracks, wear at the
area of the flange or blue discoloration caused by overheating). Mount the saw blade
in the correct direction of rotation.
7.4.1 Installing inner flange (normal cut)
For tightening the tie rod, use only the tools described in the instructions. Do not, under
any circumstances, use an impact wrench or other, similar power tools to tighten the tie
rod.
You can leave the inner flange for normal cutting installed until you are going to
make a flush cut or a dry cut. The inner flange does not necessarily have to be
removed for transport purposes.
The carrier tool for flush-cut saw blades can be used to counter-hold the tie rod.
@
Inner flange
;
Flange nut
=
O-ring
%
Cooling-water slot
&
Carrier tool for flush-cut saw blades
(
Blade guard holder
)
Saw arm
+
Tie rod
§
Shouldered guide stud
/
Saw arm arbor
1. Turn the blade guard holder up.