Hilti DST 10-CA, Руководство по эксплуатации

Страница: 47 / 52

*2328079*
2328079 English 43
Parts Procedure Daily Weekly
Saw head Clean the external splines on the flange nut
and the internal splines on the arbor, check
condition and if damage is found have the
damaged parts replaced.
✓
Check the freedom of movement of tie rod and
carrier; have repairs carried out as necessary.
✓
Clean and lubricate the external thread of the
clamping screw and the internal thread of the
inner flange; if damaged, have parts replaced
as necessary.
✓
Check the condition of the shouldered guide
studs; have them replaced if damage is visible.
✓
Check the plug connectors for cleanliness and
damage; blow out with compressed air or have
them replaced as necessary
✓
Check the cable for damage and replace it if
necessary
✓
Check the saw blade flange and the clamping
screw for wear and cleanliness. Clean or re-
place if necessary
✓
Check the saw head for oil or water leakage
and have it repaired if necessary
✓
Check the water flow and replace the mesh fil-
ter at the water supply connection if necessary
Clean the clamping screw, check it for damage
and lubricate
✓
Water hose Check the plug connectors for cleanliness,
ease of operation and freedom from leaks;
clean and lubricate (lubricant spray) as nec-
essary
✓
Check all hoses for leaks ✓
Cables /
plugs
Check the plug connectors for cleanliness,
ease of operation and freedom from damage.
Blow out with compressed air or have the parts
replaced if necessary
✓
Check the cables for damage and replace them
if necessary
✓
Transport
trolley
Check the tire pressure (see the section
headed “Technical data” for details)
✓
Tool set Check for completeness ✓
11 Transport and storage
▶
Do not transport the machine with a blade fitted.
▶
Always store the machine with the electric supply cable unplugged.
▶
Store the machine in a dry place where it cannot be accessed by children or
unauthorized persons.