Hilti DST 10-CA, Руководство по эксплуатации

Страница: 32 / 52

28 English 2328079
*2328079*
4. Before releasing your grip: Check that the guide rollers are positioned correctly and
that the locking lever is fully engaged.
Move the locking lever back and forth to check that engagement is correct.
7.2 Connecting the saw to the electric supply and water supply
@
Electric supply cable
;
Antenna
=
Connection for remote control
cable
%
Grip with integral release function
&
Grip (fixed)
(
Protective cap for plug connector
)
Securing sleeve
+
Cooling water hose connector
§
Mark for determining position
( CUT ASSIST )
/
Distance to end of cut in plus direc-
tion
( CUT ASSIST )
:
Distance to end of cut in minus
direction
( CUT ASSIST )
∙
LED operating-status indicator
(green)
CAUTION
Risk of accident! Incorrectly positioned cables and hoses can result in damage to the
equipment or other property.
▶
Position the cables and hoses so that they can follow the movement of the saw head
without being under tension.
▶
Take care to ensure that the cable plug connectors don’t lie in water.
▶
Position the cables and hoses so that they cannot come into contact with the rotating
saw blade and cannot be pinched between moving parts.
1. Connect the electric supply cable to the electric supply.
▶
The “ready for operation” indicator on the saw head shows.
2. If the following conditions are met, also take this action:
Conditions : You intend to work without wireless remote control.
▶
Remove the protective caps from the plug connectors and sockets for the remote
control cable.
▶
Bring the plug into alignment with the socket and push it into the socket as far as
it will go without applying excessive force.
▶
Check that the plug on the wireless remote control engages.
▶
Close the protective caps.