Hilti DST 10-CA, Руководство по эксплуатации

Страница: 46 / 52

42 English 2328079
*2328079*
10.3 Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious
injuries including burns.
▶
Repairs to the electrical section of the tool or appliance may be carried out only by
trained electrical specialists.
▶
Do not start the wall saw if you find damage and/or malfunctions. Have the wall saw
repaired by Hilti Service right away.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and
consumables. Spare parts, consumables and accessories approved by Hilti for use
with your product can be found at your Hilti Store or online at: www.hilti.group
Maintenance
Parts Procedure Daily Weekly
Track sup-
port
Check the contact and clamping surfaces.
Clean if necessary
✓
Check the threads for smoothness and ease of
operation. Clean if necessary
✓
Track Check the contact and running surfaces. Clean
if necessary
✓
Check the splines and the running surfaces for
damage and wear; replace the track if neces-
sary
✓
Check the tapered sleeves, clean and lubricate
with oil if necessary
✓
Check the means of securing the end stops. ✓
blade guard Check and clean inner and outer surfaces. Re-
move any slurry deposits
✓
Check that the guide rollers are free to move.
Clean or replace the parts if necessary
✓
Check the condition of the rubber tensioning
straps and replace if necessary
•/• ✓
Check the clamping lever tension and adjust if
necessary by turning the hexagon screw
•/• ✓
Saw head Check that the locking mechanism moves
smoothly and engages securely. Clean and
lubricate (grease nipples) or have repairs
carried out as necessary
✓
Check the guide rollers for ease of operation
and excessive play, have them replaced / re-
paired as necessary
✓
Clean the threads of the tie rod and inner
flange, check condition and if damage is found
have the damaged parts replaced.
✓