Hilti DST 10-CA, Руководство по эксплуатации

Страница: 14 / 52

10 English 2328079
*2328079*
View: Horizontal cut in the wall
X Keep a safe distance of at least
1.5 m away from all moving parts.
Y Never stand in line with the rotating
saw blade.
Z Never stand below the working
area
A Never stand on the other side of the
working area.
Safety measures must also be implemented in the area not directly visible to the operator,
i.e. at the rear of objects being cut.
Never loiter in a position directly below the equipment.
2.4 Safety during operation
▶
Check the flange and saw blade for damage and degrease the blade holder each time
before putting the saw into operation.
▶
Begin work with the saw only when the track supports are securely and rigidly
fastened to a solid surface and when the wall saw system has been correctly installed
(all screws tightened securely, the saw head locked securely on the track and the end
stops correctly installed).
▶
Use only suitable fastening materials of adequate dimensions to fasten the track
supports and to secure the parts of the object being cut.
▶
As a basic rule, never stand directly in line with the rotating saw blade.
▶
Always use the appropriate, correctly fitting blade guard (type BG for normal cutting,
type BGFT for flush cutting). For dry cutting, use the blade guard for dry cutting with
dust extractor.
▶
When making corner cuts that require use of a partly open blade guard, operate the
machine from the side at which the blade guard is closed, i.e. from the protected side.
When necessary, the operator must implement suitable additional safety measures.
▶
Before entering the danger area, switch the wall saw off at the on/off switch or press
the EMERGENCY STOP button. Persons may enter the danger area only after the
blade drive unit has been switched off and the blade has come to a standstill.
▶
Adhere to the permissible drive unit parameters and recommended guide values for
blade rotation speed and advance speed while sawing.
▶
Use only saw blades that comply with the requirements of EN 13236. Observe the
information on the diameter of the arbor hole and the maximum saw blade disc
thickness in the section headed Technical data . Mount the blades the right way