Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 67

2.8 Hilow Actuator Malfunction

Chapter 2: Troubleshooting Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 2 - 37

2

Yes

No

↓

→

If a only one button produces a click when pushed, go to RAP
2.5. If there is no click when either button is pushed, replace the
electrical control/lockout box (refer to procedure 4.9).

4. Check the hilow actuator motor cable connection at the electrical

control/lockout box.

The connection is sound.

Yes

No

↓

→

Insert the loose plug firmly into its socket. If this solves the
problem, go to “Final Actions” on page 2-16. If not, go to step 5.

5. Check the condition of the cable between the electrical control/lockout box

and the hilow actuator.

The cable shows no signs of damage.

Yes

No

↓

→

If the cable is damaged, replace the hilow actuator (refer to
procedure 4.12).

6. Press and hold the hilow up button (A) on the hand pendant.

The bed rises smoothly until it is between 26" and 26½" (66 cm and 67.31
cm) above the floor, and it stops automatically.

Yes

No

↓

→

Check for interference from other parts of the bed by pressing
and holding the hilow down button (B) on the hand pendant If
interference is found, correct it. If no interference is found,
replace the hilow actuator (refer to procedure 4.12).

7. Press and hold the hilow down button (B) on the hand pendant.

The bed lowers smoothly until it is between 10½" and 11" (26.67 cm and
28 cm), and it stops automatically.

Yes

No

↓

→

Check for interference from other parts of the bed. If interference
is found, correct it. If no interference is found, replace the hilow
actuator (refer to procedure 4.12).

8. Press the hilow up (A) button on the hand pendant, and raise the bed until it

is approximately 20" (50.8 cm) above the floor.

At the electrical control/lockout box, push in the hilow actuator lockout button
(C) (see figure 2-17 on page 2-38).

«
...
65
66
67
68
69
...
»

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов