Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 126

Страница: 126 / 178

4.13 Knee Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 38

RESIDENT® Low Bed Service Manual (man259)

Figure 4-15. Knee Actuator Motor Frame Connection

7. Note the knee actuator (C) cable routing, and cut the cable ties (D) that

secure the knee actuator (C) cable to the bed frame.

WARNING:

If the head and/or knee section cannot be lowered to the full flat
position, brace the section securely to prevent sudden collapse when
the support of the actuator motor is removed. Failure to do so could
result in serious personal injury.

8. If necessary, brace the head and knee sections in their raised position.

9. Remove the rue ring (E) that secures the knee actuator (C) motor to the

frame support bracket.

10. Support the knee actuator (C) motor, and remove the clevis pin (F).

11. Lower the knee actuator (C) motor, and let it rest on the floor.

12. Remove the rue ring (G) and clevis pin (H) that secure the tip of the knee

actuator (C) rod to the knee section support brace (I).

m259_042

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 126 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: