Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 36

Страница: 36 / 178

Function Checks

Chapter 2: Troubleshooting Procedures

Page 2 - 6

RESIDENT® Low Bed Service Manual (man259)

The RESIDENT® Low Bed offers the caster options shown in figure 2-2 on
page 2-6.

• Floor lock brakes (V) can be used at the head and foot ends or at the foot

end only with fixed casters (R) at the head end. The floor lock brakes are
always used in conjunction with swivel casters (W).

• Central brake casters (X) can be used at the head and foot ends or at the

foot end only with fixed casters (Y) at the head end.

• Fixed casters (Y) are used at the head end only. The foot end may have any

style of caster.

Figure 2-2. RESIDENT® Low Bed Caster Options

1. Initial Actions have been performed.

Yes

↓

→

Go to “Initial Actions” on page 2-3.

2. Inspect all brake pads for wear.

All brake pads are in good condition.

Yes

↓

→

Refer to table 2-1 on page 2-7 for the style of brake used and then
go to the page number indicated for the diagnostic RAP.

m259_048

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 36 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: