Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 165

Preventive Maintenance

Chapter 6: General Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 6 - 7

6

Preventive Maintenance Schedule

Table 6-2. Preventive Maintenance Schedule

Function

Procedure

Hilow limits

Position the hilow function to its upper and lower limits of 26" to
11.5" (66 cm to 29.2 cm) to ensure proper function of the hilow drive
assembly.
Lubricate the hilow drive assembly.

Automatic contour

Raise the head section from its full-flat position, and verify that the
knee section begins to rise to an angle of 15°.

Head section limits

Position the head section from its full-flat position to its maximum
angle of 65° to ensure proper function of the head drive assembly.
Lubricate the head drive assembly.

Knee section limits

Position the knee section from its full-flat to its maximum angle of
25° to ensure proper function of the knee drive assembly.
Lubricate the knee drive assembly.

Brakes

Test the brakes to determine if bed movement occurs when the brakes
are engaged.

Casters

Test the swivel casters to ensure they do not bind.
Check all casters for cuts, wear, tread, etc. Replace if necessary.

Siderails

Inspect the siderails for proper up, down, and storage operation.
Inspect the release latch for proper operation.
Lubricate the release latch mechanism.

Lockout box

Test each control lockout switch individually to ensure proper opera-
tion.

Pendant control

Test each pendant control switch individually to ensure the corre-
sponding function operates properly and stops once the switch is
released.

Wiring

Inspect the power cord, plug, and wiring for cuts, nicks, or breaks.
Ensure that the wiring is routed to avoid pinching. Replace if neces-
sary.

Pivot points

Using Teflon®

a

lubricant, lubricate all pivot points on the bed.

a. Teflon® is a registered trademark of E. I. du Pont and de Nemours and Company.

Headboard and
footboard

Inspect the headboard and footboard for proper aesthetics.
Clean and touch-up the headboard and footboard as necessary.

Overall appearance

Inspect the condition of the labels, paint, and general aesthetics.
Replace the labels, touch-up the paint, and clean as necessary.

«
...
163
164
165
166
167
...
»

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов