Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 161

Страница: 161 / 178

Cleaning and Care

Chapter 6: General Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 6 - 3

Cleaning and Care

WARNING:

Follow the product manufacturer’s instructions. Failure to do so could
result in personal injury or equipment damage.

SHOCK HAZARD:

Unplug the unit from its power source. Failure to do so could result in
personal injury or equipment damage.

SHOCK HAZARD:

Do not expose the unit to excessive moisture. Personal injury or
equipment damage could occur.

CAUTION:

Do not use harsh cleaners, solvents, or detergents. Equipment damage
could occur.

General Cleaning

Clean the unit with a lightly dampened cloth and ordinary disinfectants. Do not
use excessive liquid.

Steam Cleaning

Do not use any steam cleaning device on the RESIDENT® Low Bed.
Excessive moisture can damage mechanisms in this unit.

Cleaning

To remove difficult spots or stains, use standard household cleaners and a soft
bristle brush. To loosen heavy, dried-on soil or excreta, you may first need to
saturate the spot.

Disinfecting

Dilute disinfectants and germicides as specified on the manufacturer’s label.

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 161 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: