Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 129

Страница: 129 / 178

4.14 Hilow Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 41

Figure 4-16. Hilow Actuator Motor Frame Connection

8. Note the hilow actuator (C) cable routing, and cut the cable ties (D) that

secure the hilow actuator (C) cable to the bed frame.

WARNING:

If the bed cannot be lowered to its lowest position, brace the
intermediate frame components securely to prevent sudden collapse
when the support of the actuator motor is removed. Failure to do so
could result in serious personal injury.

9. If necessary, brace the intermediate frame sections in their raised position.

10. Remove the rue ring (E) that secures the hilow actuator (C) motor to the

frame support bracket.

11. Support the hilow actuator (C) motor, and remove the clevis pin (F).

12. Lower the hilow actuator (C) motor, and let it rest on the floor.

13. Mark the support brace holes that you remove the clevis pin from.

m259_043

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 129 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: