Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 125

Страница: 125 / 178

4.13 Knee Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 37

4.13 Knee Actuator

Tools required:

Screwdriver
Pliers
Cable tie tool

Removal

1. Move the bed to a convenient working location.

WARNING:

Lock all caster brakes. Failure to do so could result in inadvertent
movement of the bed. This could cause equipment damage or personal
injury.

2. Raise the foot end siderails, and lock all caster brakes or floor lock brakes.

3. If possible, lower the head and knee sections to the full flat position.

WARNING:

The bed is always energized when plugged into a power source.
Unplug the unit from its power source. Failure to do so could result in
inadvertent movement of the bed and could cause personal injury.

4. Unplug the bed from its power source.

5. Remove any mattress from the unit.

6. Remove the knee actuator plug (A) from the electrical control/lockout box

(B) (see figure 4-15 on page 4-38).

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 125 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: