Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 26

Safety Tips

Chapter 1: Introduction

Page 1 - 14

RESIDENT® Low Bed Service Manual (man259)

could result in personal injury.

WARNING:

It is not necessary or advisable for personnel to be under the bed. If
service personnel need to be under the bed, use suitable jack stands to
block up the bedframe. Failure to do so could result in personal injury.

CAUTION:

During caster replacement, examine the caster socket for cracks or
breaks. Do not install a new caster in a damaged caster socket. Early
failure of the new caster or equipment damage could occur.

WARNING:

The RESIDENT® Low Bed weighs 275 lb (125 kg). Have two or more
people who can help you lift and turn the bed. Failure to do so could
result in personal injury.

WARNING:

Use Loctite®

1

adhesive on the threads of all Torx®

2

screws before

installing them. Failure to do so could allow the fasteners to loosen.
This could lead to the sudden collapse of a bed section, which could
lead to injury to a resident or caregiver.

WARNING:

If the head and/or knee section cannot be lowered to its full flat position,
brace the section securely so it does not collapse suddenly when the
support of the actuator motor is removed. Failure to do so could result
in serious personal injury.

WARNING:

If the bed cannot be lowered to its lowest position, brace the
intermediate frame components securely to prevent sudden collapse
when the support of the actuator motor is removed. Failure to do so
could result in serious personal injury.

1. Loctite® is a registered trademark of Loctite Corporation.
2. Torx® is a registered trademark of Textron, Inc.

«
...
24
25
26
27
28
...
»

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов