Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 115

Страница: 115 / 178

4.9 Electrical Control/Lockout Box

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 27

WARNING:

The bed is always energized when plugged into a power source.
Unplug the unit from its power source. Failure to do so could result in
inadvertent movement of the bed and could cause personal injury.

4. Unplug the unit from its power source.

5. Using a screwdriver, pry the plug lock (K) from the plug ports on the

electrical control/lockout box (D) (see figure 4-11 on page 4-27).

Figure 4-11. Electrical Control/Lockout Box Connections

6. Unplug the power cord (E), knee actuator (F), head actuator (G), hilow

actuator (H), and junction box (I) plugs from the electrical control/lockout
box (D).

7. Using a phillips head screwdriver, remove the two screws (J) that secure

the electrical control/lockout box (D) to the support brackets.

Replacement

1. Place the electrical control/lockout box (D) on the support brackets, and

align the fastener holes.

m259_038

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 115 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: