Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 59

Страница: 59 / 178

2.6 Head Actuator Malfunction

Chapter 2: Troubleshooting Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 2 - 29

2.6

Head Actuator Malfunction

1. The unit is plugged to an appropriate power source.

Yes

↓

→

Plug the unit into an appropriate power source. If this solves the
problem, go the “Final Actions” on page 2-16. If not, go to step
2.

2. The head and knee lockout buttons on the electrical control/lockout box at

the foot of the bed are in the unlocked position (i.e., the buttons are out).

Yes

↓

→

Move the head and knee lockout buttons to the unlocked position
(i.e., the buttons are out). If this solves the problem, go to “Final
Actions” on page 2-16. If not, go to step 3.

3. Check the head actuator cable connection at the electrical control/lockout

box.

The connection is sound.

Yes

↓

→

Insert the loose plug firmly into its socket. If this solves the
problem, go to “Final Actions” on page 2-16. Otherwise, go to
step 4.

4. Check the condition of the cable between the electrical control/lockout box

and the head actuator

The cable shows no signs of damage.

Yes

↓

→

If the cable is damaged, replace the head actuator (refer to
procedure 4.12). If this solves the problem, go to “Final Actions”
on page 2-16. If not, go to s tep 5.

5. Press the head up (A) button and then the head down (B) button on the

hand pendant, and listen for a click (see figure 2-12 on page 2-30).

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 59 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: