Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 56

Страница: 56 / 178

2.5 Hand Pendant Malfunction

Chapter 2: Troubleshooting Procedures

Page 2 - 26

RESIDENT® Low Bed Service Manual (man259)

2.5

Hand Pendant Malfunction

1. The unit is plugged into an appropriate power source.

Yes

↓

→

Plug the unit into an appropriate power source. If this solves the
problem, go to “Final Actions” on page 2-16.

2. All lockouts on the electrical control/lockout box are unlocked (i.e., the

buttons are out).

Yes

↓

→

Unlock all lockouts. Press a button to test the hand pendant by
pushing each of the control buttons. If the hand pendant now
works, go to “Final Actions” on pa ge 2-16. Otherwise, go to step
3.

3. Plug the hand pendant into another outlet on the junction box, except for

the outlet for automatic contour.

This solves the problem.

Yes

↓

→

Go to step 6.

4. Replace the junction box (refer to procedure 4.10).

This solves the problem.

Yes

↓

→

Call Hill-Rom Technical Support at (800) 445-3720.

5. Go to “Final Actions” on page 2-16.

6. At the junction box on the patient right side of the bed, unplug the hand

pendant, and plug in a hand pendant that is known to work.

All functions work using the new hand pendant.

Yes

↓

→

Go to step 8.

7. Go to “Final Actions” on page 2-16.

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 56 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: