Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 105

4.6 Base Frame Components

Chapter 4: Removal, Replacement, and Adjustment Procedures

RESIDENT® Low Bed Service Manual (man259)

Page 4 - 17

4

8. To remove the following parts, use the proper tools and techniques, and

remove any fasteners that connect them to other components or the
intermediate frame (A) (see figure 4-6 on page 4-18):

a. To remove the bumper (B), remove the two wingnuts (C), two hex head

machine bolts (D), and four washers (E) that secure the it to the base
weldment (F).

b. To remove the lower pivot arm (G), remove the four shoulder screws

(H) and four bushings (I) that secure the it to the base weldment (F) and
the connector weldment (J), and use the screwdriver to pry off the two
pointers (K), two retaining rings (L), and two bushings (M) that secure
it to the intermediate frame (A).

c. To remove the upper pivot arm (N), remove the two shoulder screws

(O) and two bushings (P) that secure the it to the base weldment (F) and
the intermediate frame (A).

d. To remove the connector weldment (J), remove the four shoulder

screws (H) and four bushings (I) that secure the it to the two lower
pivot arms (G).

Replacement

WARNING:

Use Loctite®

1

adhesive on the threads of all Torx®

2

screws before

installing them. Failure to do so could allow the fasteners to loosen.
This could lead to the sudden collapse of a bed section, which could
lead to injury to a resident or caregiver.

1. Apply Loctite® adhesive on the threads of all Torx® screws before

installing them.

2. Perform the removal steps in reverse.

3. To ensure proper operation of the RESIDENT® Low Bed, perform the

“Function Checks” on page 2-4.

1. Loctite® is a registered trademark of Loctite Corporation.
2. Torx® is a registered trademark of Textron, Inc.

«
...
103
104
105
106
107
...
»

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов