Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 27

Страница: 27 / 178

Safety Tips

Chapter 1: Introduction

RESIDENT® Low Bed Service Manual (man259)

Page 1 - 15

WARNING:

Only facility-authorized personnel should perform preventive
maintenance on the RESIDENT® Low Bed. Preventive maintenance
performed by unauthorized personnel could result in personal injury or
equipment damage.

WARNING:

Adhere to the Infection Control Policies and Procedures from Hill-Rom.
Failure to do so could result in the spread of infection.

WARNING:

Follow the product manufacturer’s instructions. Failure to do so could
result in personal injury or equipment damage.

SHOCK HAZARD:

Exercise extreme caution when handling electrical components and
measuring voltage on live electrical circuits. Severe burns or injury
could result.

SHOCK HAZARD:

The potential of electrical shock exists when working with electrical
equipment. Personal injury could occur.

SHOCK HAZARD:

Unplug the unit from its power source. Failure to do so could result in
personal injury or equipment damage.

SHOCK HAZARD:

Do not expose the unit to excessive moisture. Personal injury or
equipment damage could occur.

CAUTION:

Do not roll the RESIDENT® Low Bed to turn it over. Lift and turn the
bed upside down. Failure to do so could result in damage to the
siderails.

Содержание RESIDENT P872



















































































































































































Результаты поиска

Содержание RESIDENT P872

Отзывы:

Hill-Rom RESIDENT P872, Руководство по обслуживанию, Страница: 27 / 178

Результаты поиска

Содержание RESIDENT P872

Отзывы: