Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 178

Hill-Rom RESIDENT P872 Скачать руководство пользователя страница 104

4.6 Base Frame Components

Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 16

RESIDENT® Low Bed Service Manual (man259)

CAUTION:

Before attempting to turn the RESIDENT® Low Bed over, secure the
head and foot sections to the mid-frame. Failure to do so could result in
damage to equipment or personnel.

6. Using a safety strap, secure the head and foot sections to the mid-frame.

WARNING:

The RESIDENT® Low Bed weighs 275 lb (125 kg). Have two or more
people who can help you lift and turn the bed. Failure to do so could
result in personal injury.

CAUTION:

Do not roll the RESIDENT® Low Bed to turn it over. Lift and turn the
bed upside down. Failure to do so could result in damage to the
siderails.

7. Have two or more people help you lift and turn the bed upside down for

access to the base components.

NOTE:
Remove or disconnect only the components necessary to replace a damaged
part.

NOTE:
The intermediate frame, itself, is not field replaceable. The intermediate frame
contains the unit’s serial number, which cannot be changed or transferred.

«
...
102
103
104
105
106
...
»

Содержание RESIDENT P872



















































































































































































Отзывы:

Нет отзывов