Hill-Rom P870 Скачать руководство пользователя страница 85

Страница: 85 / 231

2.8 Electric Head Section Does Not Raise Or Lower Correctly

Chapter 2: Troubleshooting Procedures

Page 2 - 34

Resident

LTC Bed Service Manual (man136rc)

5. The head section rises when the HEAD Up button is pressed and stops

when the button is released. Press and hold the HEAD Up button. This
adjusts the incline of the head section up to its limit of approximately 65

Yes

↓

→

Go to step 9.

6. Press the HEAD Down button. This adjusts the incline of the head section,

and travel stops when the button is released. Press and hold the HEAD
Down button. This adjusts the head section down to the flat position.

Yes

↓

→

Go to step 9.

7. Turn the control lockout knob for the head function to the locked position.

This prevents head operation. Turn the control lockout knob for the head
function to the unlocked position. This allows the head section to be
operated up and down.

Yes

↓

→

Go to RAP 2.11.

8. Go to “Final Actions—Electric Drive Model” on page 2-18.

9. Another part of the bed interferes with the head section movement to the

maximum incline or flat position.

Yes

↓

→

Replace the head motor actuator (see “Head Section Motor
Actuator” on page 4-18).

10. Eliminate the interference with the head movement of the bed.

This solves the problem.

Yes

↓

→

Call Hill-Rom

Technical Support at (800) 445-3720.

11. Go to “Final Actions—Electric Drive Model” on page 2-18.

Содержание P870








































































































































































































































Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P870, Руководство пользователя

Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды