Hill-Rom P870 Скачать руководство пользователя страница 126

Страница: 126 / 231

4.5 Head Section Motor Actuator

Chapter 4: Removal, Replacement, and Adjustment Procedures

Resident

LTC Bed Service Manual (man136rc)

Page 4 - 19

NOTE:
Record the cable routing and placement of cable ties for replacement purposes.

4. Remove the cable ties with the diagonal cutters.

5. Manually raise the foot section assembly, and fold it over toward the thigh

section assembly for easier access to the head motor actuator (C).

6. Remove the E-rings from the clevis pins (B) connecting the head motor

actuator to the main frame and to the weldment on the head section
crosstube.

7. Remove the clevis pins (B) connecting the head motor actuator to the head

section crosstube and to the main frame.

8. Remove the head motor actuator (C) and its connecting cable as an

assembly.

Replacement

1. Assemble in reverse order.

2. Ensure that all control cables are properly routed and connected to the

control box.

3. Install the cable ties to secure the control cables where they will not be

damaged during bed operation.

4. Lubricate the head motor actuator rod with lithium grease.

5. Perform an operational check of the hilow, head, and knee functions. See

“Function Checks—Electric Drive Model” on page 2-10.).

Содержание P870








































































































































































































































Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P870, Руководство пользователя

Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды