Hill-Rom P870 Скачать руководство пользователя страница 229

Страница: 229 / 231

7.11 Comfortline® Mattress (P1433)

Chapter 7: Accessories

Page 7 - 16

Resident

LTC Bed Service Manual (man136rc)

7.11 Comfortline

Mattress (P1433)

A 5" (12.7 cm) thick Comfortline mattress is available as an accessory.

Installation

Tools required:

None

1. Remove the existing mattress from the bed.

2. Remove the shipping wrappings from the Comfortline mattress.

3. Place the Comfortline mattress on the sleep surface with the label “head

section” at the head end of the bed.

4. Raise the mattress stop at the foot end of the bed to keep the mattress from

sliding toward the foot panel.

7.12 Ambulatory Assist Rail (P441A)

The ambulatory assist rail is available as an accessory to aid the resident when
getting into or exiting the bed.

Содержание P870








































































































































































































































Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P870, Руководство пользователя

Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды