manualshive.com logo in svg

Hill-Rom P870, Руководство пользователя

Поделиться
Скачать
Hill-Rom P870 Скачать руководство пользователя страница 120

4.3  Manual Knee Drive Assembly

Chapter 4: Removal, Replacement, and Adjustment Procedures

Resident

TM

 LTC Bed Service Manual (man136rc)

Page 4 - 13

4

4.3

Manual Knee Drive Assembly 

Tools required:

Needle nose pliers

Phillips head screwdriver

Crescent wrench

Lithium grease (P/N SA3351)

Removal

WARNING:

Only facility-authorized maintenance personnel should perform 
maintenance procedures on the Resident

TM

 LTC bed. Otherwise, 

personal injury can occur.

1. Remove the mattress from the bed.

2. Set both brakes on the bed by fully depressing the brake pedals located on 

both sides of the swivel caster frame assembly at the foot end of the bed. If 
the brake design has interconnecting linkage, both brakes are applied when 
either pedal is depressed. Give the bed a solid tug to ensure the brakes are 
set.

3. Adjust the bed sleep surface to its highest position by turning the hilow 

crank handle (middle handle) clockwise until it stops.

WARNING:

Electric or manual drive bed mechanisms can cause serious injury if 
operated improperly. Operate the bed only when persons are clear of 
the mechanisms.

4. Adjust the head and knee functions to their lowest (horizontal) positions by 

turning the head and knee crank handles (left and right handles, 
respectively) counterclockwise until they stop.

5. Remove the crank handle assembly for the knee drive by removing the nut 

and bolt located at the base of the crank handle.

6. Remove the rue ring cotter (A) securing the knee drive assembly to yokes 

on the thigh section. Remove the pin (B) (see figure 4-11 on page 4-14).

Содержание P870








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды