manualshive.com logo in svg

Hill-Rom P870, Руководство пользователя

Поделиться
Скачать
Hill-Rom P870 Скачать руководство пользователя страница 36

Resident

TM

 LTC Electric Drive Bed Specifications

Chapter 1: Introduction

Resident

TM

 LTC Bed Service Manual (man136rc)

Page 1 - 23

1

Brakes

The brakes are located on both sides of the swivel caster frame assembly at the 
foot end of the bed. Some models have individually operated brakes and 
require that both pedals be pressed and released separately.

Siderails

Siderails are located on both sides of the Resident

TM

 LTC electric drive bed at 

the head and foot sections. The siderails are raised and lowered independently 
of each other. The head end siderails can contain optional caregiver and 
resident controls which permit electrical adjustment of the head, knee, and 
hilow elevation.When not in use, safely store each siderail beneath the bed’s 
sleep surface frame.

WARNING:

Siderails are visual reminders for residents that identify the 
location of the edge of the bed. They are not intended for use as a 
restraint device. Appropriate medical personnel must determine the 
level of restraint necessary to ensure a resident will remain safely in 
bed. Failure to do so could result in personal injury.

Bumper

A bumper assembly is secured to the fixed caster frame at the head end of the 
bed. 

CAUTION:

Removing the bumper assembly could cause damage to the bed or 
facility.

IV Rod Sockets

Four IV rod sockets are provided. One is located at each outside corner of the 
bed. Each socket allows installation of an IV rod (accessory).

Sleep Surface Support Frame

There are two sleep surface support frames available for use with the 
Resident

TM

 LTC electric drive bed. The mattress supporting spring fabric frame 

is 36" x 80" (91.4 cm x 203.2 cm) and has 90 supporting helical springs for the 
fabric assembly. The mattress supporting optional hard pan sleep surface frame 

Содержание P870








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды