manualshive.com logo in svg

Hill-Rom P870, Руководство пользователя

Поделиться
Скачать
Hill-Rom P870 Скачать руководство пользователя страница 25

Resident

TM 

LTC Manual Drive Bed Specifications

Chapter 1: Introduction

Page 1 - 12

Resident

TM

 LTC Bed Service Manual (man136rc)

1

Brakes

The brakes are located on both sides of the swivel caster frame assembly at the 
foot end of the bed. Some models have individually operated brakes and 
require that both pedals be pressed and released separately.

Siderails

Siderails are located on both sides of the Resident

TM

 LTC manual drive bed at 

the head and foot sections. The siderails are raised and lowered independently 
of each other. When not in use, safely store each siderail beneath the bed’s 
sleep surface frame.

Siderails are visual reminders for residents that identify the location of the 
edge of the bed. They are not intended for use as a restraint device. 
Appropriate medical personnel must determine the level of restraint necessary 
to ensure a resident will remain safely in bed. Failure to do so could result in 
personal injury.

Bumper

A bumper assembly is secured to the fixed caster frame at the head end of the 
bed. 

CAUTION:

Removing the bumper assembly could cause damage to the bed or 
facility.

IV Rod Sockets

Four IV rod sockets are provided. One is located at each outside corner of the 
bed. Each socket allows installation of an IV rod (accessory).

Sleep Surface Support Frame

There are two sleep surface support frames available for use with the 
Resident

TM

 LTC manual drive bed. The mattress supporting spring fabric frame 

is 36" x 80" (91.4 cm x 203.2 cm) and has 90 supporting helical springs for the 
fabric assembly. The mattress supporting optional hard pan sleep surface frame 
is 36" x 80" (91.4 cm x 203.2 cm). The outer surfaces of the panels are formed 
down to prevent sharp edges.

Содержание P870








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды