Hill-Rom P870 Скачать руководство пользователя страница 218

Страница: 218 / 231

7.2 Trapeze Support (P846)

Chapter 7: Accessories

Resident

LTC Bed Service Manual (man136rc)

Page 7 - 5

7.2

Trapeze Support (P846)

The trapeze support assembly may be secured to either the head end or foot
end of the main frame.

CAUTION:

Do not lower the bed frame while the trapeze support is attached to the
bed. Use the control box lockout to deactivate the hilow function.

Installation

Tools required:

1/2" socket

Drive ratchet

1/2" wrench

1. Remove the hole plugs from the lower frame at the end of the bed to which

the trapeze support is to be installed.

2. Position the trapeze support on the main frame as illustrated in (see figure

7-2 on page 7-5).

Figure 7-2. Trapeze Support—P846

3. Using the screws (A) and locknuts (B), fasten the trapeze support to the

main frame of the bed.

4. Use the screws (C) and locknuts (D) to prevent side slippage of the trapeze

used.

m136_035

Содержание P870








































































































































































































































Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды

Hill-Rom P870, Руководство пользователя

Результаты поиска

Содержание P870

Отзывы:

Бренды по названию

Популярные бренды