manualshive.com logo in svg

Hill-Rom P870, Руководство пользователя

Поделиться
Скачать
Hill-Rom P870 Скачать руководство пользователя страница 217

7.1  IV Rod (P2217)

Chapter 7: Accessories

Page 7 - 4

Resident

TM

 LTC Bed Service Manual (man136rc)

7

7.1

IV Rod (P2217)

The two-sectioned, telescopic IV rod mounts in any of the sockets located at 
the four corners of the bed. The rod is adjustable in length so that it may be 
raised or lowered with respect to the bed frame.

Installation

Tools required:

None

Insert the rod into the desired socket and twist the lower section clockwise to 
lock in place.

Adjusting

1. To extend the rod, pull upward on the upper section (A) to the desired 

height (see figure 7-1 on page 7-4). 

2. To lower the rod, pull outward on the release knob (B), and manually lower 

the upper section (A) into the lower section (C).

Figure 7-1.   IV Rod—P2217

Removal

To remove the rod, twist the lower section counterclockwise and lift it from the 
socket.

A

B

C

m136_034

Содержание P870








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды