HIKVISION DS-K1TA70MI-T, Руководство пользователя

Страница: 219 / 227

The distance percentage from the face left side to the left margin in the recognition area.
The actual distance percentage should be larger than the configured value when face picture
authentication. Other percentages, distances, and angles should also meet their conditions.
Margin (Right)
The distance percentage from the face right side to the right margin in the recognition area.
The actual distance percentage should be larger than the configured value when face picture
authentication. Other percentages, distances, and angles should also meet their conditions.
Margin (Top)
The distance percentage from the face top side to the top margin in the recognition area.
The actual distance percentage should be larger than the configured value when face picture
authentication. Other percentages, distances, and angles should also meet their conditions.
Margin (Bottom)
The distance percentage from the face bottom side to the bottom margin in the recognition
area.
The actual distance percentage should be larger than the configured value when face picture
authentication. Other percentages, distances, and angles should also meet their conditions.
Pupillary Distance
The minimum resolution between two pupils when face recognition.
The actual resolution should be larger than the configured value.
Score
The device will score the captured picture according to the yaw angle, pitch angle, and
pupillary distance. If the score is less than the configured value, face recognition will be failed.
You can set the face picture parameters when authenticating.
4. Click Save.
9.14.15 Configure Supplement Light Parameters
You can turn on or off the supplement light. You can also adjust the supplement light brightness.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote configuration page.
3. Click Other → Supplement Light Parameters to enter the Configuring Supplement Light
Parameters page.
4. Select a supplement light type from the drop-down list.
5. Select a supplement light mode from the drop-down list.
6. Optional: Set the supplement light brightness.
7. Click Save to save the settings.
DS-K1TA70 Series Face Recognition Terminal User Manual
203