HIKVISION DS-K1TA70MI-T, Руководство пользователя

Страница: 166 / 227

Note
The port number of the wireless network and wired network should be consistent with the port
number of ISUP.
8. Select the Protocol Type as ISUP.
Note
If set the ISUP version as 5.0, you should create an ISUP key for the ISUP account.
9. Set an account name for the network center.
10. Click Save.
Set Device Capture Parameters
You can configure the capture parameters of the access control device, including manual capture
and event triggered capture.
Note
●
The capture function should be supported by the device.
●
Before setting the capture parameters, you should set the picture storage first to define where
the event triggered pictures are saved. For details, refer to Set Picture Storage in the user
manual of the client software. .
Set Triggered Capture Parameters
When an event occurs, the camera of the access control device can be triggered to capture
picture(s) to record what happens when the event occurs. You can view the captured pictures
when checking the event details in Event Center. Before that, you need to set the parameters for
the capture such as number of pictures captured for one time.
Before You Start
Before setting the capture parameters, you should set the picture storage first to define where the
captured pictures are saved. For details, refer to Set Picture Storage in the user manual of the
client software.
Steps
Note
This function should be supported by the device
1. Enter the Access Control module.
2. On the navigation bar on the left, enter Advanced Function → More Parameters → Capture .
3. Select an access control device in the device list and select Linked Capture.
4. Set the picture size and quality.
DS-K1TA70 Series Face Recognition Terminal User Manual
150