HIKVISION DS-K1TA70MI-T, Руководство пользователя

Страница: 184 / 227

Steps
Note
The parameters configured here will be set as default for the newly added time period. It will not
affect the existed one(s).
1. Enter Time & Attendance module.
2. Click Attendance Settings → General Rule .
3. Select the day(s) as weekend, such as Saturday and Sunday.
4. Click Save.
Configure Overtime Parameters
You can configure the overtime parameters for workday and weekend, including overtime level,
work hour rate, attendance status for overtime, etc.
Steps
1. Click Time & Attendance → Attendance Settings → Overtime .
2. Set required information.
Overtime Level for Workday
When you work for a certain period after end-work time on workday, you will reach different
overtime level: overtime level 1, overtime level 2 and overtime level 3. You can set different
work hour rate for three overtime levels, respectively.
Work Hour Rate
Work Hour Rate is used to calculate work hours by multiplying it by overtime. When you work
for a certain period after end-work time on workday, you will reach different overtime level.
You can set different work hour rates (1-10, can be a decimal) for three overtime levels. For
example, your valid overtime is one hour (in overtime level 1), and the work hour rate of
overtime level 1 is set as 2, then the work hours in the period will be calculated as 2 hours.
Overtime Rule for Weekend
You can enable overtime rule for weekend and set calculation mode.
3. Click Save.
Configure Attendance Check Point
You can set the card reader(s) of the access control device as the attendance check point(s), so that
the authentication on the card readers will be recorded for attendance.
Before You Start
●
You have added access control device(s). For details, refer to Add Device .
●
You have enabled T&A Status. For details, refer to Add General Timetable .
DS-K1TA70 Series Face Recognition Terminal User Manual
168