HGG SPC 1000, Руководство оператора, Страница: 53 / 169

Operators Manual
Pipe Profiling Machine | SPC 500-1200
45
SPC
Pipe trolley positioning
The maximum weight capacity of the pipe trolleys is shown in the table below. It is
important to ensure that there are enough pipe trolleys in place to support the weight
of the raw material to be loaded. The pipe trolleys can also be used to compensate
for distortions in the shape of the pipe. The positioning of the pipe trolleys may vary
depending on factors such as the length of the raw material, the size of the parts to be
cut and the type of cut.
Normal use
In normal use distribute the available pipe trolleys evenly over the length of the pipe.
In the example below three different pipe trolleys are present (5 tons, 10 tons & 10
tons driven). The diagram shows the optimal positioning of the trolleys and the most
efficient order in which to place them.
Note: a smaller trolley is placed next to the main drive to allow positioning as close as
possible. The motorised trolley is placed in one of the middle positions so that the pipe
can be moved along the rails. A larger trolley is placed furthest from the main drive to
provide adequate support for longer, heavier pipes.
Capacity 5 ton 10 ton 10 ton
Type Non-driven Non-driven Driven