HGG SPC 1000, Руководство оператора, Страница: 23 / 169

Operators Manual
Pipe Profiling Machine | SPC 500-1200
15
SPC
Spark and fume reversal kit
The spark and fume reversal kit is
attached to the side of the cutting trolley
on a flexible arm. The sparks and fumes
generated during the cutting process
are deflected back into the pipe being
cut. Compressed air is passed through
a nozzle creating a Venturi effect,
increasing the air flow. This channels
the remaining smoke and fumes through
the reverser and back into the pipe. The
fume extraction tube is mounted on the
back of the main drive drawing sparks
and fumes back through the main drive
to be removed by the existing fume
extraction system.
Remote control
The remote control is mounted on an arm
on the cutting trolley so that the operator
is always close to the profiling position.
The entire machine can be controlled from
this point. The intuitive graphic interface
can be operated using the touch screen.
The most common actions can also be
controlled using stainless steel buttons
on the right and bottom of the remote
control, these buttons are for ease of use
and correspond to the equivalent adjacent
buttons on the touch screen. The remote
control is also equipped with a stainless
steel keyboard and tracker ball.
Pipe support: pipe trolleys
Standard the machine comes with height
adjustable pipe trolleys. There are three
sizes of pipe trolley capable of carrying
a maximum load of 3000, 5000 and
10.000 kg. The wheels are coated with
polyurethane to ensure smooth rotation
of the pipes. The height adjustment is
hydraulic for easy operation under full
load and allows easy levelling of a loaded
pipe. For stability six support wheels
are present on each trolley. This type of
trolley allows you to change the middle
position of a pipe trolley when a pipe is
loaded and supported by 2 other trolleys.