HGG SPC 1000, Руководство оператора, Страница: 16 / 169

Operators Manual
Pipe Profiling Machine | SPC 500-1200
8
SPC
Personal safety instructions
An operator has to keep the following
safety instructions in mind:
● Do not use the machine without
following the instructions in the
manuals.
● Read and understand the Operators
Manual and all safety labels before
operating or maintaining this machine.
● Read and understand the ‘Plasma
Unit Instruction Manual’ when plasma
cutting is used.
● Read and understand the dust
collector ‘Installation and Operation
Manual’, when a dust collector is used.
● Keep these manuals at hand at
all times and read it as many
times as necessary for a complete
understanding.
● Only instructed operators are
permitted to operate this machine.
Instruction should include instructions
for operation under normal conditions
and emergency situations.
Before starting this machine, the operator
must check that:
● All persons are clear of the machine.
● No maintenance work is being
performed on the machine.
● All guards are in place.
● The machine is free of jams and other
obstacles.
● The machine has not been stopped
in such a way that another worker
can start the machine while you are
working on it.
To avoid injury the operator should:
● Never reach into the machine for any
reason unless the machine is at a
complete stop.
● Never change or disable the function
of electrical interlocks or other
machine shutdown switches.
● Never modify the machinery in any
way.
● Never exceed the maximum pipe load.
● Never approach the pipe trolley
wheel units, pipe trolley rails, cutting
trolley track when the machine is in
operation or when maintenance is
being carried out due to the risk of
crushing.
● Never approach the cutting torch,
flames from the torch will burn skin!
Always maintain a safe distance.
● Never look directly into the flame,
the bright light could damage your
eyesight. Always use safety glasses
and make sure the glass UV protection
shield supplied with the cutting device
on the machine is in place before any
cutting is done.
For safety reasons operators have to wear
the following protective equipment:
● Safety shoes.
● Flame proof overalls or flame proof
clothing.
● Flame proof gloves.
● Safety helmet.
● Ear protection.
● Safety glasses.
ATTENTION!
Consult the plasma unit instruction manual for more information about
risks and endangerments of the plasma unit and its accessories.