HGG SPC 1000, Руководство оператора, Страница: 33 / 169

Operators Manual
Pipe Profiling Machine | SPC 500-1200
25
SPC
on the right of the screen include the
oxyfuel dry run button and the preheat
enable/disable toggle button. The boxes
in the action progress section at the
bottom of the screen also vary according
to the cutting process (for example:
when using plasma, piercing occurs
automatically whereas with oxyfuel the
play button must be pressed again when
the cutting head is in position to pierce
the material). Whenever operator action
is needed to continue, the green arrow
in the bottom right hand corner of the box will be flashing. The yellow light in
the top right hand corner of the ‘Play’
button will also be flashing, press ‘Play’
to continue.
The bottom part of the profiling screen
shows the action progress. The boxes
here will be coloured orange when active
(light blue = pending, dark blue = done).
The larger boxes at the bottom show
a green, blinking arrow to inform the
operator of the next step in the process.
Press ‘Play’ to continue or ‘Skip’ to omit.
Selecting a data file or set
When the screen is first opened, select
a data file for profiling. To select a file,
click on the ‘Select data file’ button at
the top left of the content screen and
browse to the file you wish to open. Click
on ‘Open’. Once a file has been selected,
check the box to use the profiling table
(the profiling tables can be viewed in
the settings screen). Values have been
entered for different materials and
different wall thicknesses. If the box is
not checked the operator can enter the
profile parameters (cutting speed, lead in
and lead out).
A single data file may contain several
parts, each with two or more macros
to be profiled. The ‘Select set’ button
shows a list of all the sets in the data