HGG SPC 1000, Руководство оператора, Страница: 37 / 169

Operators Manual
Pipe Profiling Machine | SPC 500-1200
29
SPC
Settings screen
In the ‘Settings’ screen it is possible to
select preferences, enter values and
calibration offsets to ensure maximum
accuracy and efficient cutting. On the
left hand side of the content window a
familiar tree directory structure shows
all the options available. On the right
hand side the value fields are shown for the selected option, all preferences and
values can be entered here. Selecting
a folder on the left will display all value
fields on the right. Individual options can
also be selected on the left and only the
selected field will then be shown on the
right. For more information and details of
the settings see the table in this chapter.
Touch control Description
This button changes access to the controls, a window will open asking the new operator to enter
a password. There are three levels of access to the settings. The options available in level 1:
Operator are described in this chapter. Level 2: Maintenance can be accessed with a password
supplied by HGG. Level 3: Software is only accessible to HGG’s software engineers.
Changes to the settings can be saved (left), or discarded (right). Once the required settings and
options have all been entered don’t forget to save them! It is also advisable to make a back-up.
This can been done in the ‘Diagnostic’ screen under the ‘Support’ tab, see the following chapter.
S ETTINGS
WINDOW
I NPUT FIELDS
O PTIONS
D ISCARD
CHANGES
S AVE SETTINGS
C HANGE
OPERATOR