HGG SPC 1000, Руководство оператора, Страница: 43 / 169

Operators Manual
Pipe Profiling Machine | SPC 500-1200
35
SPC
Cutting trolley
Under this tab you will find the control boxes for the cutting trolley’s longitudinal
movement and height.
The control boxes
Each box contains a title with the part
of the machine it relates to and the
action that can be carried out. The
status changes depending on the action
being carried out, you can find a list of
actions and their explanations in the
tables following. The switch indicators
show the hardware limits (end switches)
these will light up (red) when an end
switch is reached. The home light will be
lit up (green) until the home switch is
reached. The information window shows
data relevant to the action being carried
out, usually the position (in millimetres/
inches or degrees/radians) and the speed
are shown. In the bottom of the box
you will find the touch controls, some of
these have a larger corresponding button
in the ‘quick action’ buttons.
The cutting trolley controls
Cutting trolley longitudinal
T ITLE
S TATUS
S WITCH
INDICATORS
I NFORMATION
WINDOW
T OUCH
CONTROLS
Touch control Description
These buttons move the cutting trolley in positive and negative directions along the length of
the pipe (the CTL axis – see axis definition). While pressed the light comes on and the status
will change from ‘idle’ to ‘jogging’ (manual movement).
When the home button is pressed the cutting trolley will move to the ‘home’ position. The light
will be red while the chuck is jogging and will turn yellow when the home position is reached.
The status will change from ‘idle’ to ‘homing’.
The zero button will change the position value in the information window to zero. This is purely
for the operator’s convenience, for example to establish a reference point, the actual position
does not change.
Cutting trolley height
Touch control Description
These buttons move the cutting trolley up and down (CTH axis – see axis definition). The
‘home’ button moves the cutting trolley to the height ‘home’ position.
The first button moves the cutting trolley to the ‘pipe’ position (on the pipe). The second moves
the cutting trolley to the ‘top’ position. The third to the ‘float’ position, for definitions of these
terms please refer to Appendix F: Terminology.