manualshive.com logo in svg

HGG SPC 1000, Руководство оператора, Страница: 3 / 169

Поделиться
Скачать
HGG SPC 1000 Скачать руководство пользователя страница 3

Operators Manual

Pipe Profiling Machine | SPC 500 - 1200

II

Preface

This is the operators manual providing information regarding the operation and safe use of the pipe 
profiling machines. The machine types SPC (stationary pipe cutter) 500-1200 are covered by this manual. 
This manual is part of a set of manuals supplied with the pipe profiling machines.

Manual sets

This manual describes the operating procedure of the pipe profiling machine. This 
manual also contains important information regarding safe use of the machine. 
In the appendices you will find the periodic maintenance and grease schedule, 
the calibration procedure for the cutting head and instructions for cutting 
test pieces. Also included in the appendices is the procedure for restoring the 
software and a list of error codes in numerical order. For reference purposes you 
will also find definitions of the terminology used in this manual and a quick guide 
to the oxyfuel cutting process.

Technical Manual

This manual contains an installation checklist for the assembly and installation 
of the machine, a list of spare parts and wear and tear parts for the machine 
configuration. Also included in the technical manual are the main assembly 
drawings, electrical diagrams and connection lists and pneumatic and hydraulic 
diagrams. Detailed technical specifications and sub-assembly and individual part 
drawings form part of the technical dossier which is stored at HGG.

Software Manual

In this manual you will find instructions for using the ProCAM software for 
online and offline programming of the profiles that can be cut on the machine. 
This manual also describes the nesting of parts in raw materials and all the 
other features of ProCAM. There is also a course book which includes exercises 
providing a step for step guide to using the software. Manuals for the optional 
ProCAD connections for AutoCAD and Tekla will also be included if applicable.

Options

In the options you will find manuals for any other optional features delivered with 
the machine, such as a plasma unit, dust collector, marking unit etc.

For safe operation and to ensure the reliability of the pipe profiling machine it is important that all the 
above manuals are available to all the people who work with the machine and to those who are involved 
with the machine such as supervisors, maintenance engineers, service engineers and work preparation 
personnel. 

Operators Manual

Содержание SPC 1000










































































































































































Отзывы:

Нет отзывов