User manual - Machine Automation Solution - V3R003
48 / 102
11.1.2 Wayline settings
This screen is divided into two types of settings. It contains the settings for saving the guide in the operation, and also for
the parameters used for curves and maneuver detection, as described in the following topics.
·
The user can determine the standard way he wants the display to save a new guide that is generated. See the
topic.
·
The user can determine the operating logic of the
Realign
option, used on the operation screen with an active
guide. See the
·
The user can determine the operating logic of the Nudge option, used on the operation screen with an active
guide. See the
·
The user can configure the automatic detection parameters for the equipment to use when generating a guide.
See the
topic.
Figurae - Guide settings
11.1.2.1 Saving mode
The type of guide saving must be previously defined. To define the way the guides are saved, proceed as follows:
1.
Select the
Guidance
option in the
Configuration menu
;
2.
Select the
Wayline settings
option.
3.
Select the option in the frame on the left.
Figure - Save mode
The following saving options are available:
·
Automatically save
By selecting this option, the system will automatically save the guide without asking the user for a name. A
name is given by the system comprising a numeric system containing the date followed by other numbers.
·
Never save
By selecting this option the system will never save the created guide. This way, the guide will be available for
saving as a temporary guide.
·
Always ask
By selecting this option, the system will always ask if you want to save the guide. An option to edit the
filename will open and you will be able to save the guide.
11.1.2.2 Realign mode
The
Realign
option is presented on the operation screen, when working with an active guide, see the topic
