User manual - Machine Automation Solution - V3R003
55 / 102
Figure - Select perimeter
To clear the loaded perimeter, select the
Clear perimeter
option
.
11.1.6 Apply outside map
The
Apply off the map
function is used to indicate whether the application should exceed the perimeter limits or not.
·
On
The equipment will not cut the application when leaving the area of the defined perimeter.
·
Off
The application will be suspended automatically when the vehicle exceeds the perimeter limit.
To change the configuration, proceed as follows:
1.
Access the
Guidance
option from the
Configuration menu
;
2.
Select the
Apply off the map
option to alter between
On
and
Off.
Figure - Apply off the map
11.2 Operation
The operation is started by selecting the suspended operation option in the center of the operations screen.
Important
The application will only begin when the implement moves and exceeds the minimum speed
set for the
GNSS
.
Select the type of operation you desire, see the available types on the following topics
.
11.2.1 Creating a guide line
Important
Before starting the operation, it is important to ensure the vehicle and implement dimensions
are correct.
Warning
In order for the guide to work properly, the GNSS must be operating properly. Do not start
while the
“GNSS Syncing”, “GNSS without communication”, “No Glide”, or “No RTK” alert
show, or while the device is connected to less than four satellites.
Guidance types are used to define a guide line in the field. Display
operates with:
