User manual - Machine Automation Solution - V3R003
62 / 102
Move the guide by manually adjusting the GNSS position
Field displacement is used to move the line 2 cm at a time to the right or to the left. It is recommended when it is
necessary to make a fine adjustment to the line that may have dislocated.
Important
As the position of the GNSS is changed, it is not possible to access the original guide again, if
the intention is to reuse the guides to do another job in the area already worked, use the other
option for this button, which creates a new guide.
To displace the field guide, proceed as follows:
1.
With the guide active, press option
Manual
a
djustment
;
2.
Arrows for adjusting the displacement will be presented on the top of the screen;
3.
Pulse the arrows for the desired direction.
Important
Each time the arrow is pressed, the line is moved 2cm to the chosen side.
Figura - Manual adjustment GNSS
Move the guide by manually adjusting the position of a new guide
Manual guide adjustment is used to create a new guide according to the user-defined value to the left or right
Recommended when it is necessary to make a larger adjustment on the line.
Figure - Manual adjustment procedure
To displace the field guide, proceed as follows:
1.
With the guide active, press option
Manual
a
djustment
;
2.
Arrows for adjusting the displacement will be presented on the top of the screen;
3.
Press the arrows for the desired direction for 1 second.
4.
Enter in the keyboard the distance you want the guide to be moved in that direction.
5.
5. Press
OK
to confirm the operation.
